High Speed Door Servo Control System

Introduction

🍸Thank you for choosing High Speed Door Servo Control System.

🌄Please read this manual carefully before you start to use the system. In this manual you will find instructions for how to set the operating code the controlunit, malfunction diagnostics and debugging, and routine maintenance.

Notice: 

♎ Before connecting the system to live wire place make sure the power supplyis off.

🔴 Please make sure the power voltage in the main circuit is the some ascontroller’s rated voltage. Also please make sure the ground terminal is properly and reliably connect to the ground wire.

✅ DO NOT touch output terminal directly. DO NOT shot circuit the outputterminal and out shell.

𓆏 After the power supply is cut, and before the LCD is off, there still highvoltage electricity in the circuit, so DO NOT touch the internal wiring and electronic components.

✨  Internal wiring and electronic components are very sensitivity to staticelectricity, so DO NOT let any object contact the internal wiring and electronic components of motor driver and the main circuit of the touch control panel.

Inspection

𝔉All product has passed inspection and testing before is leaving the factory.

😼When you open the unit place make sure there is no damager during shipping.

ꩵAlso to confirm the equipment ratings are matching your requirement.

General Characteristic

൲Our servo control system is suitable for high speed PVC and aluminum doors.

𝐆The system is in compact package, with high torque and high operating speed,lower noise, high reliability, smooth and soft operating curves, it’s suitable for high speed and intensive usage environment.

♔The rolling curtain can be controlled by wall switch, push button, bluetooth, radar,safety edge, photo eye, induction loops, etc.

🎃Operating Speed: 0.5m/s-1.5m/s; Operating Width: ＜16 ㎡/30 ㎡/60 ㎡; Daily operating time: 2000 time; Rated voltage: 220V; Rated Output: 0.75KW/1.5KW/2.2KW。

你大概全文翻译：

快速门伺服控制系统

介召

感谢您选择高速门伺服控制系统。

🔥在逐渐开始利用系統以后，请细致入微阅读文章本指南。在本指南中，您将寻到关以怎样将运营编号设施为把控机组，故障问题原因和测试包括日常性保护的说明书。

特别留意： 

在将整体接触到地线以后，请确定交流电源已关毕。

🌄请保证 主电路原理中的开关电源工作相电压是保持器的额定容量工作相电压。另一个，请保证 与地面接线端子准确能信地接触到地线。

禁止一直触摸式所在的接线端子排。也不要射击类所在的接线端子排和的外壳。

ဣ割断开关电源后，在LCD关闭开始之前，三极管中仍来源于高电压阻，如此严禁触模内部管理接线头和电子设备电子器件。

♒内外部接到线图和电子厂器材组件对静电感应比较过敏，因时请让任何人产品接受直流电机能够器的内外部接到线图和电子厂器材组件及及手触把控好面板价格的主三极管。

观察

一切產品在原厂前并未在抽样检查和检查。

拆开系统时，请为了保证在装运的时候中没能磨损者。

同样验证机額定值包含您的标准要求。

一样 功能

博鱼体育 的步进驱动器设定软件常用做极速PVC门和铝门。

𝓀该方法系统采取紧密型封装形式，更具高力矩，高加载网络速度，低嘈音，高安全性，平静湿润的方法曲线方程，选用做高，密布的应用环境。

卷帘窗帘需要能够 墙面电开关，快捷，蓝牙，声纳，安全保障外缘，光眼，感應感应线圈等来控制。

ဣ进行操作速度快：0.5m / s-1.5m / s;生意长宽比：<16㎡/30㎡/60㎡;每日任务进行操作期限：2000次;功率打印输出功率：220V;功率打印输出：0.75KW / 1.5KW / 2.2KW。